3
Multimeter Features
106
Keysight U1241C/U1242C User’s Guide
Performing interval logs (AUto)
Ensure that
is selected as the data logging option in the multimeter’s setup.
The default recording interval duration is 1 second. To change the recording
interval duration, refer to “
Changing the sample interval duration
.
The duration set in the multimeter’s setup will determine how long each recording
interval takes. The input signal value at the end of each interval will be recorded
and saved into the multimeter’s memory.
Start the interval log mode
1
Press
for > 1 second to start the interval log mode.
and the log entry number are displayed at the top of the display.
Subsequent readings are automatically recorded into the multimeter’s memory
at the interval specified in the Setup menu.
Figure 3-7
Interval log display
2
Press
for > 1 second to exit the interval log mode.
The maximum number of readings that can be stored for the interval log is 2000
entries. When all entries are occupied,
will be shown.
The interval and event log share the same memory buffer. Increased usage of the
interval log entries will lead to the decrease of the maximum entries for the event
log, and vice versa.
Hold
Log
Hold
Log
Содержание U1241C
