Installation Note N5242-90010 17
Description of the Upgrade
All Instruments
All Instruments
Step 6. Remove the Front Panel Assembly
Refer to
for this step of the procedure.
1. With a 5/16-in wrench, remove all front panel jumpers (item
①
).
2. With a T-10 TORX driver, remove the screws (item
➁
) from the sides of the
frame.
3. Slide the front panel over the test port connectors.
4. Disconnect the front panel interface ribbon cable (item
③
). The front panel
is now free from the analyzer.
Figure 3
Front Panel Assembly Removal
Before removing the front panel from the analyzer, lift and support the
front of the analyzer chassis.