Keysight N1913 Скачать руководство пользователя страница 3

Страница: 3 / 141

Keysight N1913/1914A Service Guide

Certification

Keysight Technologies certifies that this product met its published specifications

at the time of shipment from the factory. Keysight Technologies further certifies

that its calibration measurements are traceable to the United States National

Institute of Standard and Technology, to the extent allowed by the Institute’s

calibration facility, and to the calibration facilities of other International Standard

Organization members.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by Buyer, Buyer-supplied software or interfacing,

unauthorized modification or misuse, operation outside of the environmental

specifications for the product, or improper site preparation or maintenance. No

other warranty is expressed or implied. Keysight Technologies specifically

disclaims the implied warranties of merchantability and fitness for a particular

purpose.

Exclusive Remedies

The remedies provided herein are buyer's sole and exclusive remedies. Keysight

Technologies shall not be liable for any direct, indirect, special, incidental, or

consequential damages, whether based on contract, tort, or any other legal

theory.

Содержание N1913














































































































































Результаты поиска

Содержание N1913

Отзывы:

Бренды по названию

Популярные бренды

Keysight N1913, Руководство по обслуживанию

Результаты поиска

Содержание N1913

Отзывы:

Бренды по названию

Популярные бренды