Installation Note
N9020-90239
37
Installation Procedure
3. Refer to
. Install the semi-rigid coaxial cables cable clip as shown. Note that the
rear-most semi-rigid cable, W6, should not be in cable clip, but the semi-rigid cable next to it,
W19, should be in the rear-most position of the cable clip. Use two cable ties (1400-0249), one to
the left of the cable clip and one to the right of the cable clip, to secure W6 and W19 together. Do
not tighten these cable ties too tight to avoid bending the cables.
4. Install the flexible coaxial cable in the cable clip as shown.
5. Dress the coaxial cables and semi-rigid cables neatly and tie together using cable ties (1400-0249)
at the locations indicated. Attach two cable ties around the bundle of gray cables.
Figure 30
Dressing Cables to A16 Reference