Keysight M9484C, Руководство по началу работы и устранению неисправностей

Страница: 67 / 141

M9484C Startup Guide 67
Front and Rear Panel Features
Front Panel Features
13 Trig A, B, or C SMB General Purpose Trigger/Marker Ports
100 MHz maximum frequency (drive or receive)
As a Driver:
— 3.3 V output
— Max voltage applied at any output in high-Z state is
5.5 V and 3.8 V when in high or low state
— 50 Ω output resistance
As a Receiver:
— 5 V input
— 5 V tolerant input (damage at 5.5 V)
— Selectable input termination (50
Ω or 10 K Ω)
— Receiver threshold resolution (5 mV)
14 Ext 1 or 2 SMB External Inputs 1 and 2
— 16 bit ADC
— Selectable input impedance: 50
Ω, 600 Ω, or 1 M Ω
— Input Bandwidth: 10 MHz
— Input Range: ±1 V (±5 V tolerant)
15 LF Out SMB Low Frequency Output
— 16 bit DAC
— Output impedance: 50
Ω
— Output range into 50 Ω: ±5 V (DC to 5 MHz), ±2.5 V
(5 MHz to 10 MHz)
— Output range into 1 M Ω: ±6.5 V (DC to 5 MHz), ±4.5 V
(5 MHz to 10 MHz)
— Bandwidth: 10 MHz (sine wave); 2 MHz (square and
triangle waves)
16 LO 1 and LO 2 APC 3.5 mm 9.6 GHz signal
17 Event 2 BNC Baseband Marker Output #2
Maximum Edge Rate: every 1.667 ns
VOL < 0.4 V, VOH is 2.8 V to 3.3 V into high impedance
50
Ω impedance (nominal)
Damage level is outside of -0.5 V to 3.8 V
Item Connector Type
Description
# Name