Keysight M9484C Скачать руководство пользователя

Страница: 132 / 141

132

M9484C Startup Guide

Safety and Maintenance Information
Warnings, Cautions, and Notes

General Safety Considerations

Before Applying Power

If this product is not used as specified, the protection provided by

the equipment could be impaired. This product must be used in a

normal condition (in which all means for protection are intact) only.

The M9484C VXG is heavy and requires two people to lift and carry

it. Instrument is front heavy.Do not attempt to lift or carry it on your

own.

This product has been designed and tested in accordance with accepted

industry standards, and has been supplied in a safe condition. The

documentation contains information and warnings that must be followed

by the user to ensure safe operation and to maintain the product in a safe

condition.

The M9484C is a Class 1 laser product.

Use a Keysight supplied power cord that has the same or better

electrical rating.

Capable of rendering an electrical shock or burn.

Install the instrument so that the detachable power cord is readily

identifiable and is easily reached by the operator. The detachable

power cord is the instrument disconnecting device. It disconnects

the mains circuits from the mains supply before other parts of the

instrument. The front panel switch is only a standby switch and is

not a LINE switch. Alternatively, an externally installed switch or

circuit breaker (which is readily identifiable and is easily reached by

the operator) may be used as a disconnecting device.

This is a Safety Protection Class I Product (provided with a

protective earthing ground incorporated in the power cord). The

mains plug shall only be inserted in a socket outlet provided with a

protective earth contact. Any interruption of the protective

conductor inside or outside of the product is likely to make the

product dangerous. Intentional interruption is prohibited.

Содержание M9484C














































































































































Результаты поиска

Содержание M9484C

Отзывы:

Похожие инструкции для M9484C

Бренды по названию

Популярные бренды

Keysight M9484C, Руководство по началу работы и устранению неисправностей

Результаты поиска

Содержание M9484C

Отзывы:

Похожие инструкции для M9484C

Бренды по названию

Популярные бренды