manualshive.com logo in svg

Keysight M9018A, Руководство для стартапов

Поделиться
Скачать
Keysight M9018A Скачать руководство пользователя страница 31

2

4

Keysight M9018A PXIe 18-Slot Chassis Startup Guide

STEP 3: Turn On and Verify Operation of the Chassis System

Power sequencing of the chassis

Power sequencing of the chassis

This section describes the power sequencing required for a remote controller PC 

and the chassis. Also, the two methods of powering up the chassis are described.

Power sequence requirements

When powering up the system, the chassis should be powered up first. After 

powering up the chassis, you should wait at least three seconds before turning 

on the PC. The chassis front panel temperature LED, which is on for three 

seconds after the chassis is powered up, provides a convenient way to measure 

this delay, as shown below.

Figure 4

Wait three seconds after powering up the chassis before turning on 

the PC

The PC should be shut down before the chassis is powered down. This will 

prevent the chassis, as it’s being powered down, from disrupting operation of the 

PC. 
In brief, the PC should be off whenever the chassis is powered up or down. 

Because chassis modules are not hot-swappable, chassis modules should only 

be added or removed when the chassis is powered down.
The above power sequence doesn’t apply to an embedded controller installed in 

the chassis because the embedded controller and chassis are powered together.

Chassis power

(High = powered up)

( g

p

p)

Chassis front panel

temperature LED

The temperature LED, which is on for the first three seconds after 
the chassis is powered up, can be used as an indicator of when to 
turn on the PC – when the LED turns off, the PC can be turned on.

Remote Controller PC

(High = turned on)

The chassis must be 
powered up before the 
PC is turned on to 
ensure that the PC 
BIOS will enumerate

It is recommended that the PC be shut 
down before the chassis is powered 
down because many PCs don’t have the 
capability to safely remove (eject) PCIe-
connected devices. Therefore, powering-

BIOS will enumerate 
the chassis slots as 
the PC boots.

connected devices. Therefore, powering
down the chassis first can disrupt 
operation of the PC.

Содержание M9018A





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды