Keysight M8920A, Руководство по началу работы

Страница: 44 / 93

Step 4 -Install the Modules
If using the M9018B or M9019A 18-slot chassis, the recommended Keysight M8920A
PXIe Radio Test Set is configured as follows:
Part Number Module Name Slots Required
Recommended Slot
Location
M9037A
1
Embedded controller 1 1
2
M9421A VXT PXIe vector transceiver 4 12,13,14,15
3
M9470A 50 W PXIe RF interface 2 16,17
4
M9260A Audio analyzer 1 None
5
Torque specification for all SMA connectors is 8 in -lb (0.904 Nm).
M8920A Cable and Module Table
Part Number Connection Cable Description
M9470-21615 M9470A 100 MHz Out (Reference)
to VXT 100 MHz In Cable, rigid, SMB (Male) - SMB
(Male)
M9470-21617 VXT RF Out to
M9470A RF In Cable, rigid, SMA (Male) - SMA
(Male)
M9470-21618 M9470A RF Out to VXT RF In Cable, rigid, SMA (Male) - SMA
(Male)
1
This Keysight controller is recommended because it has the required 16 GB of
memory.
2
The embedded controller can only be located in the dedicated controller slot,
marked with a triangle.
3
It is recommended the VXT to be located in the right-most slot group of the
M9018B/M9019A chassis to minimize the impact of high temperature levels from the
50 W RF interface module.
4
The 50 W RF interface module should be located on the right side of the VXT module
to minimize the impact of high temperature levels on the VXT module. Also, the
cables were designed to work best in this configuration.
5
Since the Audio analyzer has no physical connection to either of the other two
modules, it can be located in any slot, preferably distant from the 50 W RF interface
module.
44 M8920A Getting Started Guide