Installation
1
Network Analyzer
17
Starting the E5080A
This section describes how to turn ON/OFF the E5080A power and
how to cut off the power supply in the case of emergency.
Turning the Power ON and OFF
The standby switch can turn ON/OFF the E5080A. The color on
the button shows the status, as indicated below:
Perform the following steps to turn the power ON or OFF.
Turning the Power ON
Step 1. Confirm if the Line Switch on the rear panel is turned
ON. The switch should always be turned ON.
Step 2. Press the standby switch once. It changes to green
color.
This operation turns ON the power, and the E5080A starts the
self-test.
Step 3. Confirm that the self-test indicates normal operation.
Normal operation is confirmed by the self-test if no error message
appears.
Turning the Power OFF
Step 1. To turn OFF the power of the E5080A, first, press this
standby switch or send a shutdown command from the external
controller to activate the shutdown process (the process of
software and hardware necessary to turn OFF the power supply).
This puts the E5080A into the standby state and the button
changes to orange color.
Step 2. Next, if necessary, turn OFF the power supply to the
power cable receptacle (Line Switch) on the rear panel.
Indicator Color
Description
Green
Normal power on status
Orange
Standby status
Red
Illegal power on status
Содержание E5080A
