Keysight E1458A страница 3 Скачать руководство пользователя

Страница: 3 / 46

Notices

No part of this manual may be repro

duced in any form or by any means

(including electronic storage and retrieval

or translation into a foreign language)

without prior agreement and written con

sent from Keysight Technologies, Inc. as

governed by United States and interna

tional copyright laws.

Manual Part Number

E1458-90010

Edition

Second Edition, October 2019

Published by

Keysight Technologies, Inc.

900 S. Taft Ave.

Loveland, CO 80537 USA

Sales and Technical Support

To contact Keysight for sales and techni

cal support, refer to the support links on

the following Keysight websites:

www.keysight.com/find/E1458A

(product-specific information and sup

port, software and documentation

updates)

www.keysight.com/find/assist

(world

wide contact information for repair and

service)

Declaration of Conformity

Declarations of Conformity for this prod

uct and for other Keysight products may

be downloaded from the Web. Go to

http://keysight.com/go/conformity

and

click on “Declarations of Conformity.” You

can then search by product number to

find the latest Declaration of Conformity.

Technology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such

license.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,” AND

IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE EDI

TIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL WAR

RANTIES, EITHER EXPRESS OR IMPLIED,

WITH REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MER

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS OR

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR OF ANY INFOR

MATION CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A SEP

ARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Keysight Technologies does not warrant

third-party system-level (combination of

chassis, controllers, modules, etc.) per

formance, safety, or regulatory compli

ance unless specifically stated.

DFARS/Restricted Rights

Notices

If software is for use in the performance

of a U.S. Government prime contract or

subcontract, Software is delivered and

licensed as “Commercial computer soft

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause.

Use, duplication or disclosure of Software

is subject to Keysight Technologies’ stan

dard commercial license terms, and non-

DOD Departments and Agencies of the

U.S. Government will receive no greater

than Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Gov

ernment users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR 252.227-

7015 (b)(2) (November 1995), as applica

ble in any technical data.

Содержание E1458A















































Результаты поиска

Содержание E1458A

Отзывы:

Похожие инструкции для E1458A

Бренды по названию

Популярные бренды

Keysight E1458A, Руководство по обслуживанию

Результаты поиска

Содержание E1458A

Отзывы:

Похожие инструкции для E1458A

Бренды по названию

Популярные бренды