Keysight Technologies X-Series, Руководство по программированию

Страница: 238 / 398

238 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide
Creating and Downloading Waveform Files
Creating Waveform Data
Line Code—Interleaving and Byte Swapping for Little Endian Order
20
21
22
23
24
25
26
27
28
29
30
char iqbuffer[NUMSAMPLES*4];
for(index=0; index<numsamples; index++)
{
short ivalue = idata[index];
short qvalue = qdata[index];
iqbuffer[index*4] = (ivalue >> 8) & 0xFF;
iqbuffer[index*4+1] = ivalue & 0xFF;
iqbuffer[index*4+2] = (qvalue >> 8) & 0xFF;
iqbuffer[index*4+3] = qvalue & 0xFF;
}
return 0;
Line Code Description—Interleaving and Byte Swapping for Little Endian Order
20 Define a character array to store the interleaved I and Q data. The character array makes byte swapping easier,
since each array location accepts only 8 bits (1 byte). The array size increases by four times to accommodate
two bytes of I data and two bytes of Q data.
21–29 Create a loop to do the following:
— Save the current I data array value to a variable.
NOTE
In rare instances, a compiler may define short as larger than 16 bits. If this
condition exists, replace short with the appropriate object or label that defines a
16–bit integer.
— Save the current Q data array value to a variable.
— Swap the low bytes (bits 0–7) of the data with the high bytes of the data (done for both