Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 249
Creating and Downloading Waveform Files
Loading, Playing, and Verifying a Downloaded Waveform
1.
List the waveform files from the volatile memory waveform list:
Send the following SCPI command:
:MMEMory:CATalog? "WFM1:"
2.
Select the waveform segment file(s) from the volatile memory waveform
list:
Send the following SCPI command:
:SOURce:RADio:ARB:WAVeform "WFM1:<file_name>"
3.
Save the waveform segment(s) (
“<waveform1>”
,
“<waveform2>”
, ...), to
non–volatile memory as a waveform sequence (
“<file_name>”
), define
the number of repetitions (<reps>), each waveform segment plays, and
enable/disable markers (
M1|M2|M3|M4|
...), for each waveform segment:
Send the following SCPI command:
:SOURce:RADio:ARB:SEQuence
"<file_name>","<waveform1>",<reps>,M1|M2|M3|M4,{"<waveform
2>",<reps>,ALL}
:SOURce:RADio:ARB:SEQuence? "<file_name>"
4.
Play the waveform sequence:
Send the following SCPI commands:
:SOURce:RADio:ARB:STATe ON
:OUTPut:MODulation:STATe ON
:OUTPut:STATe ON
M1|M2|M3|M4
represent the number parameter of the marker selected (i.e.
1|2|3|4
). Entering
M1|M2|M3|M4
causes the signal generator to display
an error. For more information on this SCPI command, refer to the signal
generator’s SCPI Command Reference.
Содержание X-Series
Страница 4: ...4 ...
Страница 10: ...10 Contents ...
