Keysight Technologies U2941A, Руководство по эксплуатации

Страница: 18 / 33

18 Keysight U2941A Operating Guide
Connection Cables
– BNC to two-wire cable (U2941-61601)
Follow the procedure below to connect the BNC to two-wire cables from the
U2722A/U2723A to the U2941A input connectors.
1 Push the cables through the cable casing. Refer to the U2722A/U2723A USB
Modular Source Measure Unit User’s Guide for the details.
2 Insert the black wire ends of the cables into the SENSE connectors of the
U2722A/U2723A. Insert the red wire ends into the OUTPUT connectors.
3 Push the cable casing towards the connector until it firmly envelops the
connector.
4 Connect the BNC ends of the cables to the U2941A input connectors.
To connect the U2722A/U2723A via the U2751A to the U2941A, use the U2922A
terminal block. Refer to the U2751A USB Modular Switch Matrix User’s and
Service Guide for details on the U2922A terminal block.
1 m
40 mm
6.4 mm