Keysight Technologies U2941A, Руководство по эксплуатации

Страница: 29 / 33

Keysight U2941A Operating Guide 29
Installing the Parametric Measurement Manager
1 Disconnect any instrument that is connected to your PC and close all other
applications on your PC.
2 Insert the Keysight Parametric Measurement Manager CD-ROM into your
CD-ROM drive.
3 If the installation menu does not appear after a few seconds, go to Start > Run
and type
<drive>:\Autorun.exe
where
<drive>
is your CD-ROM drive
location. Click OK to begin installation.
4 Click Application on the Keysight Parametric Measurement Manager
Installation Menu to begin the installation.
5 Click OK to begin the installation.
6 If you do not have any of the prerequisites installed, the InstallShield Wizard
software prerequisite will appear.
7 Click OK to begin the installation of the listed missing prerequisites.
8 Once the above installation has completed, installation of the Parametric
Measurement Manager will proceed as normal.
9 The Keysight Parametric Measurement Manager 1.0 InstallShield Wizard
dialog will appear. Click Next to begin.
10 Read the License Agreement and select I accept the terms in the License
Agreement to proceed. You may click Print to print a hardcopy of the Keysight
License Terms for your reference. Click Next to proceed.
11 Fill in the Customer Information Form accordingly, and click Next .
12 Click Next to install to the specified folder or click Change to install to a
different folder.
13 Click Install to begin the installation of the Parametric Measurement Manager.
14 Click Finish when the installation has completed.
15 A shortcut to the Parametric Measurement Manager will be created to your
desktop.
NOTE
Refer to the Keysight U2941A Parametric Measurement Manager Application
Software Help File for more information on the software features and functions.