IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
77
Installing N108xA on a PC Without N1010A FlexDCA
3
Starting the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application
After you install the N108xA-Series IEEE 802.3 Ethernet KR/CR Compliance Test Application on a PC
without the N1010A FlexDCA interface, follow the steps below to start the N108xA-Series IEEE 802.3
Ethernet KR/CR Compliance Test Application:
1 Ensure that the 86100D or N1000A Oscilloscope is added to the Keysight Connection Expert and
that the connection is active. Refer to
“Adding 86100D or N1000A to Keysight Connection
2 From the Windows
Start
menu, navigate to
Start>All Programs>Keysight FlexDCA Applications>802.3
Test App
and click
Launch 802.3 Test App
.
3 The N108xA Compliance Test Application banner appears followed by the
Connect to FlexDCA
dialog.
Figure 79
Connect to FlexDCA dialog
4 Enter the SICL address or VISA alias, if known, else select the
Select from Keysight Connection Expert
option to find the SICL Address/VISA alias.
5 Click
OK
to connect.
• The default view of the N108xA Compliance Test Application appears.
