IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
43
Installing N108xA and N1010A FlexDCA on a PC
2
Connecting N1010A FlexDCA to 86100D or N1000A
1 On the 86100D Oscilloscope, launch the Keysight FlexDCA application.
2 From the FlexDCA’s main menu, click
Help
>
About FlexDCA...
. The
About 86100D
dialog box
appears.
3 In the
System Information
area, scroll down to view the
Computer Name
entry.
Alternatively, you can obtain the computer name from the Windows
System
properties.
Figure 43
86100D Oscilloscope’s hostname
4 Record the Computer Name (corresponds to hostname) as you will need this name later in this
procedure.
86100D Computer Name: ________________________
NOTE
If you are using the N1010A FlexDCA Remote Access Software on your PC to launch the
N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application, make sure that the
Oscilloscope and your PC are connected to the LAN.
NOTE
This section lists the steps for 86100D DCA-X oscilloscope. Perform similar steps for the
N1000A DCA-X oscilloscope.
