2
Installing N108xA and N1010A FlexDCA on a PC
42
IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
To install the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application’s license using Keysight
License Manager version 5.0 or earlier
1 From the Keysight License Manager window’s main menu, click
File>Install...
or right-click within
the left pane of the Keysight License Manager window and select
Install...
.
Figure 41
Installing license file on Keysight License Manager version 5.0 or earlier
2 The
Install License File(s)
dialog box appears.
Figure 42
Selecting license file from the folder
3 Navigate to the folder where the N108xA IEEE 802.3 Ethernet KR/CR licenses are saved.
4 Select the license and click
Open
. The license files are installed and an entry is displayed in the
Keysight License Manager.
5 Close the Keysight License Manager.
You may have up to four licenses: N1081A-1FP, N1082A-1FP, N1083A-1FP, and N1084A-1FP. If you
are using one of the switching test sets (switch matrix), you will also need one of the N1081A-7FP,
N1082A-7FP, N1083A-7FP, or N1084A-7FP licenses.
Using same procedure, you can install the 86100DU-401 license.
