IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
23
Introduction
1
7 Copy Network Analyzer SICL Address to the Clipboard:
a
Click the
Instruments
tab of the Keysight Connection Expert.
b
Click the ENA/PNA listing on the left pane, and copy the SICL address using
Ctrl + C
keys.
Note that the address on your end will be different from what is shown in the image.
Figure 17
Copying Network Analyzer’s SICL Address
8 Start the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application. Refer to
N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application” on page 19
for instructions.
