manualshive.com logo in svg

Keysight Technologies M9381A PXIe, Руководство для стартапов

Поделиться
Скачать
Keysight Technologies M9381A PXIe Скачать руководство пользователя страница 44

Keysight M9391A PXIe Signal Analyzer & M9381A PXIe Vector Signal Generator 1 MHz to 3 GHz or 6 GHz

44

 – Secondary 100 MHz & IF connections (8120-5091, short SMB-SMB)

 – LO distribution connections (E6630-60004, SMA-SMA)

 – Unused M9301A modules

For additional information, see 

.

Sharing the M9301A Synthesizer's LO

Multiple M9391A PXIe VSAs in Two Chassis

Up to eight M9391A PXIe VSAs can be installed in two M9018/M9019A 18-slot 
PXIe Chassis, sharing a single embedded controller, as shown in the image below. 
In the recommended configuration described below, the master chassis is the 
chassis containing the M9037A embedded container. The first M9391A instrument 
in the master chassis is designated as the System Master while the first M9391A 
instrument in the other (slave) chassis is designated as the Group Master of that 
chassis. All the other M9391A instruments in the configuration are designated as 
slaves.

Each chassis has its own M9300A PXIe Frequency Reference that is shared by all 
the instruments in that chassis. The M9300A PXIe Frequency Reference must be 
installed in slot 10 of each chassis. For recommended configuration, the 10 MHz 
reference signal for both the chassis is provided by the M9300A in the master 
chassis from the OCXO Out connector. Alternatively, you can use an external 10 
MHz reference signal. For recommended configuration, the OCXO output is split 
and distributed to the two Reference modules using equal length cables as shown 
in the image below. It is critical to synchronize multiple chassis if timing and/or 
phase synchronization is important to your measurements. For more information on 
how to set up the 10 MHz reference, refer to 

.

Synchronizing Multiple Chassis

The M9037A embedded controller is recommended for multi-chassis 
configurations. The M9036A embedded controller or standalone PC are both 
supported. For a list of personal computers that have been tested to be compatible 
with the M9018/M9019A chassis, refer to 

PC Tested Configurations with PXI/AXIe 

 . Similarly, using M9037A or M9036A has several 

Chassis – Technical Overview

prerequisites. For more information, please contact your local Keysight 
Technologies Inc. representative.

Содержание M9381A PXIe












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды