Step 3: Install the Modules
4x4 MIMO Configuration in Two PXIe Chassis with Embedded Controller
For cabling details of the M9381A and M9391A refer to
MIMO Instrument Connections (page 17)
For the first (top) configuration - slave
From the M9300A (slot 10) use four 8121-2175 cables to make the following connections:
l
100 MHz Out 1 to M9301A 100 MHz In (slot 9)
l
100 MHz Out 2 to M9301A 100 MHz In (slot 14)
l
100 MHz Out 3 to M9301A 100 MHz In (slot 5)
l
100 MHz Out 4 to M9301A 100 MHz In (slot 4)
For the second (bottom) configuration - master
From the M9300A (slot 10) use four 8121-2175 cables to make the following connections:
l
100 MHz Out 1 to M9301A 100 MHz In (slot 9)
l
100 MHz Out 2 to M9301A 100 MHz In (slot 5)
l
100 MHz Out 3 to M9301A 100 MHz In (slot 14)
l
100 MHz Out 4 to M9301A 100 MHz In (slot 4)
These configurations can be used for x4 source only or analyzer only configurations.
LTE/LTE-A Multi-Channel Reference Solution
27
