Step 3: Install the Modules
MIMO Instrument Connections
Recommendation
:
Install semi-rigid cables first.
Torque specification
on SMA connectors: 8 Lb-In (0.904 Nm).
For all MIMO configurations, the M9300A Reference should be installed in slot 10 (the timing slot).
M9381A Cable and Module Table
Part Number
Connection
Cable Description
8121-2063
This cable can be used to direct an External Reference
into the M9300A Ref In connector.
Cable, coaxial, BNC (male) - SMB (female), 1200 mm
8120-5091
M9300A 100 MHz Out 1 to M9301A 100 MHz In
Cable, coaxial, SMB (female) - SMB (female)
8120-5091
M9301A 100 MHz Out to M9310A 100 MHz In
Cable, coaxial, SMB (female) - SMB (female)
8120-5091
M9310A 100 MHz Out to M9311A 100 MHz In
Cable, coaxial, SMB (female) - SMB (female)
8120-5091
M9310A Trig 1 to M9311A Trig 1 for Pulse Mod.
Cable, coaxial, SMB (female) - SMB (female)
W1312-20266
M9301A RF/LO Out 1A to M9311A LO In
Cable, semi-rigid, SMA (male) - SMA (male)
W1312-20267
M9311A RF Out to M9310A RF In
Cable, semi-rigid, SMA (male) - SMA (male)
M9391A Cable and Module Table
Part Number
Connection
Cable Description
1250-23161
M9350A RF In connector saver
Adaptor, coaxial straight SMA
(male) - SMA (female)
8121-20631
This cable can be used to direct an External Reference
into the M9300A Ref In connector.
Cable, coaxial, BNC (male) - SMB
(female) 1200 mm
8120-5091
M9300A 100 MHz Out 1 to M9301A 100 MHz In
Cable, coaxial, SMB (female) -
SMB (female) 120 mm
LTE/LTE-A Multi-Channel Reference Solution
17
