Keysight Technologies EXR Series, Руководство по конфигурации оборудования

Страница: 30 / 34

30 Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide
5
Next Steps
Use MultiScope Control Software
After the MultiScope system hardware has been configured and you have
performed each oscilloscope’s calibration procedure, you can use MultiScope
control software to make data acquisitions. Your options are:
• Infiniium oscilloscope software on the Leader oscilloscope. MultiScope
software is included as a standard feature.
• D9010BSEO Infiniium Offline oscilloscope analysis software on an external host
computer. MultiScope software is included as a standard feature.
Infiniium Oscilloscope Software on the Leader Oscilloscope
With Infiniium oscilloscope software version 10.20 and higher, the MultiScope
hosted instruments capability is available from within an Infiniium UXR-Series
oscilloscope (in the box) as well as from the Infiniium Offline software running on a
PC. Connecting to and controlling multiple oscilloscopes from within an Infiniium
oscilloscope has the following advantages:
• You have the full triggering capability of the Infiniium oscilloscope, including
InfiniiScan. (From the Infiniium Offline software, you have only edge and glitch
trigger modes.)
• No additional computer is required to run the Infiniium Offline software.
• No space for an additional computer is necessary.
MultiScope software is included as a standard feature.
When using Infiniium oscilloscope software on the Leader oscilloscope, you must
set up remote connections to the Follower oscilloscopes using the Keysight
Connection Expert (which is part of the Keysight IO Libraries Suite).
D9010BSEO Infiniium Offline Oscilloscope Analysis Software
The D9010BSEO Infiniium Offline oscilloscope analysis software lets you identify
oscilloscopes in a MultiScope system, perform time-correlation calibration
(including channel deskew, see “UXR-Series MultiScope Calibration
Connections" on page 28), capture data, view waveforms, and perform analysis.
When using Infiniium Offline software on the host computer, you must set up
remote connections to the Leader and Follower oscilloscopes using the Keysight
Connection Expert (which is part of the Keysight IO Libraries Suite).
Host Computer Requirements
For the D9010BSEO Infiniium Offline oscilloscope analysis software, Keysight
recommends a host computer with:
• A Windows 10 64-bit operating system with at least 8 GBytes of RAM and
25 GBytes of hard drive space.