Keysight Technologies EXR Series, Руководство по конфигурации оборудования

Страница: 26 / 34

26 Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide
4
Two-Oscilloscope System, MXR/EXR-Series
From the N2124A multi-frame cable kit, use these cables:
Connections for Reference Clock Skew Calibration
The following connections are required for reference clock skew calibration. These
same connections are also required for the optional drift correction.
1
Connect the Follower's AUX OUT signal to the channel 4 inputs on both
oscilloscopes using BNC cables and a passive power splitter or divider.
From the N2124A multi-frame cable kit, use these power dividers and cables:
Next Steps
Once connections are made, see Chapter 5 , “Next Steps,” starting on page 27.
Connection Use Cable/Adapters
Trig 8120-1840 BNC cable, 48 in. length
Ref Clk 8120-1840 BNC cable, 48 in. length
Use Cable/Adapters/Power Divider Notes
0955-2638, power divider
8120-1839 (qty 3) BNC cable, 24 in. length