background image

Notices

© Keysight Technologies, Inc. 2013-2021

No part of this manual may be reproduced in 

any form or by any means (including 

electronic storage and retrieval or 

translation into a foreign language) without 

prior agreement and written consent from 

Keysight Technologies, Inc. as governed by 

United States and international copyright 

laws.

Manual Part Number

54964-97024

Edition

Fourth edition, April 2021

Available in electronic format only

Published by:

Keysight Technologies, Inc.

1900 Garden of the Gods Road 

Colorado Springs, CO 80907 USA

Warranty

The material contained in this document is 

provided "as is," and is subject to being 

changed, without notice, in future editions. 

Further, to the maximum extent permitted 

by applicable law, Keysight disclaims all 

warranties, either express or implied, with 

regard to this manual and any information 

contained herein, including but not limited 

to the implied warranties of 

merchantability and fitness for a particular 

purpose. Keysight shall not be liable for 

errors or for incidental or consequential 

damages in connection with the furnishing, 

use, or performance of this document or of 

any information contained herein. Should 

Keysight and the user have a separate 

written agreement with warranty terms 

covering the material in this document that 

conflict with these terms, the warranty 

terms in the separate agreement shall 

control.

Technology License

The hardware and/or software described in 

this document are furnished under a license 

and may be used or copied only in 

accordance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer 

software," as defined by Federal Acquisition 

Regulation ("FAR") 2.101. Pursuant to FAR 

12.212 and 27.405-3 and Department of 

Defense FAR Supplement ("DFARS") 

227.7202, the U.S. government acquires 

commercial computer software under the 

same terms by which the software is 

customarily provided to the public. 

Accordingly, Keysight provides the Software 

to U.S. government customers under its 

standard commercial license, which is 

embodied in its End User License Agreement 

(EULA), a copy of which can be found at 

www.keysight.com/find/sweula

. The 

license set forth in the EULA represents the 

exclusive authority by which the U.S. 

government may use, modify, distribute, or 

disclose the Software. The EULA and the 

license set forth therein, does not require or 

permit, among other things, that Keysight: 

(1) Furnish technical information related to 

commercial computer software or 

commercial computer software 

documentation that is not customarily 

provided to the public; or (2) Relinquish to, 

or otherwise provide, the government rights 

in excess of these rights customarily 

provided to the public to use, modify, 

reproduce, release, perform, display, or 

disclose commercial computer software or 

commercial computer software 

documentation. No additional government 

requirements beyond those set forth in the 

EULA shall apply, except to the extent that 

those terms, rights, or licenses are explicitly 

required from all providers of commercial 

computer software pursuant to the FAR and 

the DFARS and are set forth specifically in 

writing elsewhere in the EULA. Keysight 

shall be under no obligation to update, 

revise or otherwise modify the Software. 

With respect to any technical data as 

defined by FAR 2.101, pursuant to FAR 

12.211 and 27.404.2 and DFARS 227.7102, 

the U.S. government acquires no greater 

than Limited Rights as defined in FAR 27.401 

or DFAR 227.7103-5 (c), as applicable in any 

technical data.

Safety Notices

This product has been designed and tested 

in accordance with accepted industry 

standards, and has been supplied in a safe 

condition. The documentation contains 

information and warnings that must be 

followed by the user to ensure safe 

operation and to maintain the product in a 

safe condition.

CAUTION

CAUTION

 notice denotes a hazard. 

It calls attention to an operating 

procedure, practice, or the like that, 

if not correctly performed or 

adhered to, could result in damage 

to the product or loss of important 

data. Do not proceed beyond a 

CAUTION

 notice until the indicated 

conditions are fully understood and 

met.

WARNING

A WARNING notice denotes a 

hazard. It calls attention to an 

operating procedure, practice, or 

the like that, if not correctly 

performed or adhered to, could 

result in personal injury or death. 

Do not proceed beyond a WARNING 

notice until the indicated 

conditions are fully understood and 

met.

 

Содержание EXR Series



































Отзывы: