background image

Page 24

Find us at 

www.keysight.com

 

Digital input/ouput

Use the digital outputs with an external power supply to control microwave switches 
and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to 
sense limit switch and digital bus status. There are no complex handshake modes; reads 
and writes are initiated either from the front panel or the bus. 

Port 1, 2 

8 bit, input or output, nonisolated

Vin(L) 

< 0.8 V (TTL)

Vin(H) 

> 2.0 V (TTL)

Vout(L) 

< 0.8 V @ Iout = –400 mA

Vout(H) 

> 2.4 V @ Iout = 1 mA

Vin(H) max 

< 42 V with external open drain pull-up

Alarming 

Maskable pattern match or state change

 

Speed 

4 ms (max) alarm sampling 

 

Latency 

5 ms (typical) to DAQ970A alarm output

Read/write speed  95/s

Totalize input

Count events from devices like photo interrupters, limit switches, and Hall-effect 
sensors.

It keeps an updated total which can be read via the front panel or programmatically 
at any time. With 26 bits of resolution, it can count events at full speed for nearly 11 
minutes without an overflow.

Max count 

2

26

 - 1

Totalize input 

100 kHz (max) Rising or falling edge,  

 

 

 

programmable
Signal level 

1 Vp-p (min) 42 Vpk (max)

Threshold 

0 V or TTL, jumper selectable

Gate Input 

TTL-Hi, TTL-Lo, or none

Count reset 

Manual or Read + Reset

Read speed 

85/s

Analog output

Use the two electronically calibrated analog outputs to source bias voltages to your 
device under test, to control your analog programmable power supplies, or use the 
outputs as setpoints for your control systems. The outputs are programmed directly in 
volts, either from the front panel or from the bus.

On top of that, it has two additional channels (Channel 6 and 7) that provide the ability 
to sense output current when sourcing voltage, or sense output voltage when sourcing 
current.

DAC 1, 2 

± 12 V or ± 24 mA analog outputs

Resolution 

100 uV, 0.2 uA

IOUT 

15 mA max per channel

Settling time 

1 ms to 0.01% of output

Accuracy 

±(% of mV)

 

1 year ± 5 °C 

Voltage: ± 0.027% 4.4 mV

 

 

Current: ± 0.115% of 4.4 uA

www.allice.de 

Allice Messtechnik GmbH 

Содержание DAQ970A



























Отзывы: