Keysight Technologies 85059A, Руководство по эксплуатации и обслуживанию

Страница: 55 / 65

85059A 1.0 mm Calibration and Verification Kit 6-1
6
Troubleshooting
If you suspect a bad calibration, or if your network analyzer does not pass
performance verification, follow the steps in
Figure 6-1 on page 6-2 .
Returning a Kit or Device to Keysight Technologies
If your kit or device requires service, contact Keysight - refer to “Contacting
Keysight” on page 6-2 . When you send the kit or device to Keysight, include a
service tag (found at the end of this manual) on which you provide the
following information:
•
Your company name and address.
•
A technical contact person within your company, and the person's
complete phone number.
•
If you are returning a complete kit, include the model number and serial
number.
•
A list of your network analyzer model numbers.
•
If you are returning one or more devices, include the part numbers and
serial numbers.
•
Indicate the type of service required.
•
Include any applicable information.
Where To Look For More Information
This manual contains limited information about network analyzer system
operation. For complete information, refer to the PNA Help System. To do so,
press the Help key on the front panel of the PNA.
If you need additional information, contact your local Keysight Technologies
representatives- refer to
“Contacting Keysight” on page 6-2 .