Keysight Technologies 85059A, Руководство по эксплуатации и обслуживанию

Страница: 57 / 65

85059A 1.0 mm Calibration and Verification Kit 7-1
7
Replaceable Parts
The following replaceable parts table lists the replacement part numbers for
the 85059A calibration and verification kit contents. To order a listed part, note
the description, part number, and the quantity desired and contact Keysight
Technologies - refer to
“Contacting Keysight” on page 6-2 .
Replacing the Verification Data
The verification data contains unique data that applies to the individual
verification devices. No two devices have the same performance data. It is not
a trivial matter to replace lost or damaged data, so it is important to make one
or more backup copies.
If your verification data is lost or damaged, and you have no backup copies,
take one of the following actions:
If Recertification is not required in the near future . Contact your nearest
Keysight service office for a replacement. Please specify the information in the
table below.
If recertification will be required soon. Keysight recommends that you have
the verification kit recertified early. New verification data will be generated
during the recertification process.
Table 7-1 Information to Specify When Ordering Replacement Verification
Data
Device Model Number Serial Number Part Number
Kit
Device 1
Device 2
Device 3
Device 4
___________________ ___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
Needed: (check) PNA USB drive____; Data sheets ____
Last Recertification: Date _________________; Serviced by ___________________