Keysight Technologies 85033E, Руководство пользователя и обслуживания

Страница: 5 / 52

1
Keysight 85033E
3.5 mm Calibration Kit
User’s and Service Guide
1 General Information
Calibration Kit Overview
The Keysight 85033E 3.5 mm calibration kit is used to calibrate Keysight
network analyzers for measurements of components with 3.5 mm connectors
up to 9 GHz.
Kit Contents
Use the Contents List in the shipping container to verify the completeness of
your shipment. Although this list is the most accurate, you can also use the
illustration in Chapter 7 to verify the items in your shipment. If your shipment is
not complete, contact Keysight Technologies - refer to ‘v.
Refer to
Table 6-1 on page 6-3 for part numbers of kit contents.
Broadband Loads
The broadband loads are metrology-grade, 50 ohm terminations which have
been optimized for performance up to 9 GHz. The rugged internal structure
provides for highly repeatable connections. A distributed resistive element on
sapphire provides excellent stability and return loss.
Offset Opens and Shorts
The offset opens and shorts are built from parts which are machined to the
current state-of-the-art in precision machining. The offset short’s inner
conductors have a one-piece construction, common with the shorting plane.
The construction provides for extremely repeatable connections. The offset
opens have inner conductors which are supported by a strong,
low-dielectric-constant plastic to minimize compensation values. Both the
opens and shorts are constructed so that the pin depth can be controlled very
tightly, thereby minimizing phase errors. The lengths of the offsets in the opens
and shorts are designed so that the difference in phase of their reflection
coefficients is approximately 180 degrees at all frequencies.
Open-Short-Load Holders
The open-short-load (OSL) holders are included for your convenience. The OSL
holders allow you to keep all of the calibration devices in two handy
assemblies. Load each OSL holder with calibration devices of the same