EN - 8
User Manual
4. SWITCHING ON AND NORMAL FUNCTIONING
To switch on the instrument follow these simple rules:
1.
Turn the [VOLUME] potentiometer to the left (closed).
2.
When using headphones, do not wear them.
3.
Switch on the instrument through the [POWER] switch on the rear panel.
4.
Wait until the LED light sequence on the front panel is over and the letter "
M--
" appears on the display:
the instrument is now ready to be played.
5.
Adjust the volume as needed and / or wear headphones if necessary.
After switching on, the instrument always recalls the following settings:
-
391B
REVERB TYPE: HALL
-
392B
REVERB PRE ROTARY: POST
-
393B
DRIVE TYPE: CLASSIC
-
394B
ROTARY SLOW – FAST : SLOW
-
395B
ROTARY TYPE: CLASSIC
-
396B
ROTARY DIRECT: OFF
-
397B
ROTARY MEMPHIS STYLE: OFF
-
398B
PEDALS TO LOWER: OFF
-
399B
PEDALS DIRECT: OFF
-
400B
PEDALS SUSTAIN: 0
-
401B
PEDALS SPLIT POINT: C3
-
402B
PERCUSSION ON/OFF: ON
-
403B
PERCUSSION SOFT/NORMAL: SOFT
-
404B
PERCUSSION SLOW/FAST: FAST
-
405B
PERCUSSION 2nd/3rd: 3rd
-
406B
PERCUSSION VOLUME: 64
-
407B
PERCUSSION DECAY: 64
-
408B
MODEL TYPE: ‘70
-
409B
MODEL CROSSTALK: 64
-
410B
MODEL KEYCLICK: 64
-
411B
EQ BASS: as before switching off
-
412B
EQ MIDDLE: as before switching off
-
413B
EQ TREBLE: as before switching off
-
414B
DRAWBARS: UPPER
-
415B
PRESETS: NO
-
416B
VIBRATO/CHORUS UPPER: OFF
-
417B
VIBRATO/CHORUS LOWER: OFF
-
418B
GLOBAL TUNING: 0
-
419B
GLOBAL TRANSPOSE: 0
-
420B
GLOBAL TONE CONTROL: as before switching off
-
421B
GLOBAL LOCK DRAWBARS: as before switching off
-
422B
GLOBAL LOCK CONTROLS: as before switching off
-
423B
GLOBAL ROTARY PEDAL MODE: as before switching off
-
424B
GLOBAL EXPRESSION PED. TYPE: as before switching off
-
425B
GLOBAL EXPRESSION PED. MIN.: as before switching off
-
426B
MIDI MODE: as before switching off
-
427B
MIDI CHANNEL UPPER: as before switching off
-
428B
MIDI CHANNEL LOWER: as before switching off
-
429B
MIDI CHANNEL PEDAL: as before switching off
-
430B
MIDI SPLIT POINT UPPER/LOWER: C3
-
431B
MIDI LOWER OCTAVE: OFF
-
432B
MIDI THRU: as before switching off
The functions shown in bold can be saved to Memories for later use. Saved settings can be recalled at any
time using Memories. For more information on Memories see par. 4.9.
4.1 PLAYING THE LEGEND EXP
Legend Exp
simulates the upper and lower manuals as well as the pedalboard of electromechanical organs.
From this point onward, with regards to
Legend Exp
,
-
upper manual
refers to the Upper
section
-
lower manual
refers to the Lower
section
-
pedalboard
refers to the Pedals
section
These sections can be played in different ways, according to the instrument(s) transmitting the signal and the
user’s preferences. First, select the appropriate MIDI data reception mode, called MIDI MODE.
To select a MIDI MODE, press and hold the [ROTARY] button and then push the [DRIVE] button repeatedly.
An alternative procedure is holding down the [DRIVE] button and then [ROTARY] until the letters "
MdE
" appear
on the display (the same message will appear at the first access to the MIDI menu after switching on the
instrument).
Now press [VALUE +] or [VALUE -], to switch between modes. The display will show the currently selected
MIDI MODE:
-
436B
“
Md1
”: MIDI MODE 1
-
437B
“
Md2
”: MIDI MODE 2
