Key Automation 14A, Инструкции и предупреждения по установке и использованию

Страница: 26 / 116

26
EN
4.8 - NIGHT LIGHTS
The night lights function automatically with the Eclipse flashing light
connected appropriately.
The Night Light System switches the lights on or of 15 minutes
after the set threshold is exceeded. This delay is to prevent false
To customise, proceed as follows:
switch-on or switch-off due to external light sources such as car
headlights.
PARAMETERS DESCRIPTION DEFAULT MIN. MAX. UNIT
1
AUTOMATIC LIGHT
0 = Night Light System deactivated
1 = Night Light System active (automatically activated
during learning of the stroke with the ECLIPSE flashing
light connected)
0 0 1
2
LIGHT INTENSIVITY 1 to 5 = Brightness at which LEDs switch on during the
night
3 1 5
3
EXTERNAL LIGHT
LEVEL
1 = Light sensor tripped with low outdoor light
2 = Light sensor tripped with medium outdoor light
3 = Light sensor tripped with bright outdoor light
2 1 3
7
SLOW DOWN
CLOSING SPEED
Motor speed during closing deceleration phase.
1 = minimum
2 = low
3 = medium
4 = high
5 = maximum
1 1 5
8
STEP BY STEP
SS configuration:
0 = Normal (OP-ST-CL-ST-OP-ST…)
1 = Alternate STOP (OP-ST-CL-OP-ST-CL…)
2 = Alternate (OP-CL-OP-CL…)
3 = Apartment block – timer (always opens)
4 = Apartment block with immediate reclosure (always
opens. Closes if gate is open)
0 0 4
9
MOTOR 2
DELAY
Leaf 2 opening delay with gate closed
0 - 60 sec.
2 0 60 s
10
SLOW DOWN
LENGTH
Deceleration distance
0 = Programming decelerations
1 to 100 = Motor deceleration percentage during
opening and closure
0 0 100
% (step
of 1)
11
ENERGY SAVING
Energy saving: enables photocell switch-off when gate
is closed
0= disabled
1= enabled
0 0 1
14A NIGHT LIGHTS