background image

4

Handling the equipment

■ 

Before using the equipment for exercise, check carefully to

ensure that it has been correctly assembled.

■ 

It is not recommended to use or store the apparatus in a

damp room as this may cause it to rust. 

P

lease ensure that no

part of the machine comes in contact with liquids (drinks, per-
spiration etc.). This may cause corrosion.

■ 

The machine is designed for use by adults and children

should not be allowed to play with it. Children at play
behave unpredictably and dangerous situations may occur for
which the manufacturer cannot be held liable. If, in spite of
this, children are allowed to use the equipment, ensure that
they are instructed in its proper use and supervised
accordingly.

■ 

The exercise cycle complies with the DIN EN 957 - 1/5, class

HA. It is therefore suitable for therapeutic use.

■ 

Before beginning your first training session, familiarize

yourself thoroughly with all the functions and settings of the
unit.

■ 

A slight production of noise at the bearing of the centrifugal

mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse
pedalling result from engineering and are absolutely safe.

■ 

The exercise cycle has a magnetic brake system.

■ 

The equipment is independent of revolutions per minute.

Assembly Instructions

GB

For Your Safety

Exercise  should be used only for its intended purpose, i.e. for

physical exercise by adult persons.

Any other use of the equipment is prohibited and may be dan-

gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment.

Exercise  has been designed in accordance with the latest stan-

dards of safety. Any features which may have been a possible
cause of injury have been avoided or made as safe as possible.

Incorrect repairs and structural modifications (e.g. removal or

replacement of original parts) may endanger the safety of the
user.

Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts
should be replaced immediately and the equipment taken out
of use until this has been done. Use only original KETTLER spare
parts.

If the equipment is in regular use, check all its components thor-

oughly every 1 -2 months. Pay particular attention to the tightness
of bolts and nuts.This applies especially to the securing bolts for
saddle and handelbars.

To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this  product should be
serviced regulary (once a year) by specialist retailers.

Instruct persons using the equipment (in particular children) on

possible sources of danger during exercising.

The unit requires a power supply of 220-230 V/50 Hz. It should

be connected only to a safety socket with a single 10-A fuse.
Before commissioning the appliance pay attention to the fact that
the correct plug-in power supply unit (observe marking) has
been connected properly. 

Important: 

Do not under any circumstances carry out electrical

repairs or alterations yourself. Always ensure that such work is
done  by a properly qualified electrician.

I

mportant:

disconnect the apparatus from the mains before doing

repair, maintenance or cleaning work.

Do not use a multiple power socket for the running belt. If an

extension cable is being used, ensure that it complies with the
VDE regulations.

When the unit is not in use, unplug it from the power supply.

Ensure that the power cable is not pinched and that no-one can

trip over it.

All electric appliances emit electromagnetic radiation when in

operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed might
be distorted (e.g. pulse measurement).

Before beginning your program of exercise, consult your doctor

to ensure that you are fit enough to use the equipment. 

Base your

program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!

Any interference with parts of the product that are not described

within the manual may cause damage, or endanger the person
using this machine. Extensive repairs must only be carried out
by KETTLER service staff or qualified personnel trained by KETTLER.

Always observe the general safety rules and precautions for

working with electrical equipment.

Before beginning your program of training, study the instructions

for training carefully.

Our products are subject to a constant innovative quality

assurance. We reserve the right to perform technical modifica-
tions.

In case of enquiry, please contact your KETTLER dealer.

In choosing the location of the apparatus, ensure a sufficient safety
distance  from any obstacles. The apparatus must not be mounted
in the immediate vicinity of main passageways (paths, doorways,
corridors).

■ 

For a comfortable training position please adjust the handlebar
andsaddle position to your body height.

Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a
safe place for maintenance purposes or for ordering spare parts.

Содержание DX 1 PRO

























Отзывы: