Kett LE-330J, Руководство по эксплуатации

Страница: 19 / 40

19
Press the key while holding the probe toward the air.
"---" is shown in the display.
Input the coating thickness of the calibration foil (40.0
µ
m).
Press the key. The number displayed disappears and S.
NO increments from 1 to 2 to indicate that the unit is ready
for calibration using the second standard foil.
@
#
$
<Calibration using the calibraiton foil (100
µ
m)>
%
Place the 100
µ
m standard foil on the zero foil (substrate)
and repeat the measurement procedure 5 times.
• Depending upon the type of material, the value displayed may differ greatly
from that indicated in the example to the left. However, you can continue
the procedure by setting it near the setting value by performing steps
&
and
*
.
1
2
5
Step Operation Display Explanation
(Measure 5 times)
○○○
○