KETRON SD5, Руководство пользователя

Страница: 53 / 122

SD5
51
trol an external MIDI module. The page called up from F5 Filter shows a table of four lines and four columns relati-
ve to the sixteen Parts. To be able to access the MIDI filter of a single Part use the F1 and F6 push buttons for Parts
1, 2, 3 and 4 that are to be selected by pressing the same push buttons repeatedly. Use push buttons F2 and F7 for
Parts 5, 6, 7, and 8. Use push buttons F3 and F8 for Parts 9, 10, 11 and 12 and push buttons F4 and F9 for Parts 13, 14,
15 and 16. Once the Part to which the MIDI filter is to be applied has been found, select which MIDI message is not to
be carried during playback using the DATA CURSOR push buttons and enable the filter using the F10 On/Off push but-
ton. The filter is enabled when “ON” appears next the MIDI message to be filtered. The following MIDI messages can
be filtered:
Notes: all notes within the track
Control Change: all Control Changes within the track
Program Change: all Program Changes
After Touch: all After touch events
Pitch Bend: all Pitch Bend events
Volume: only Control Change 07 Volume
Pan: only Control Change 10 Pan
Reverb: only Control Change XX Reverb Send
Chorus: only Control Change XX Effect Send
Modulation Wheel: only Control Change 01 Modulation
Expression: only Control Change 11 Expression
RPN: only Control Change XX RPN
NRPN: only Control Change XX NRPN
To exit from FF55 FFiilltteerr press EEXXIITT or F5 Escape. You will be returned to the main page of SSoonngg PPllaayy.
F6 Key Shift : This changes the transposition of the track selected by up to +/- 24 semitones. The value can be changed using the
D
DA ATTA A C CU UR RSSO OR R push buttons which, if pressed together at the same time, reset the value.
F7 Channel Tx Rx : When the push button FF77 is pressed repeatedly it switches from TX (which indicates the transmission MIDI channel) to
RX (which establishes the MIDI receiving channel). The value can be changed using the D
DA ATTA A CCU UR RSSO OR R push buttons. If
no value is specified the track receives and transmits on the MIDI channel having the same number as the Part.
F8 Part Mode : This modifies the operational mode of the track, using the D DA ATTA A C CU UR RSSO OR R push buttons. The possible choices are:
Voice: track dedicated to the use of a voice
Drumset: track dedicated to the use of a Drum Set
Drum2: track dedicated to the use of Live Drums
Vocalize: track dedicated to the control of the Vocalizer
Based on the choice made Drum Set, Live Drum, Voice and Vocal Set can be called up or otherwise; whereas in the
case of Voice and Drum Set mode the Voice and Drum Set are called up normally. For Drum 2 and Vocal Set the Live
Drums and Vocal Sets must be selected using the D
DA ATTA A CCU UR RSSO OR R push buttons.
N Noottee:: The modification of the operational mode of a track can make the song incompatible with modules using the
General MIDI format, but it offers the best possible conditions for creating Midi files on the SD5.
F9 Mute : If this function is enabled , the selected track will not be heard during playback.
F10 16 Parts : This enables the display of each single parameter, showing its value for all sixteen Parts.
MODIFYING A PARAMETER FOR THE SIXTEEN PARTS
As already mentioned the status of a single parameter for all sixteen tracks can be
displayed using the FF110
0 1166 PPaarrttss function just described above.
To rapidly access a parameter, select it from the GM Part page and then press FF110 0 1166
PPaarrttss to display the status of that parameter for the sixteen tracks. The page FF1100 1166
PPaarrttss structure shows a table with four rows and four columns relative to the sixteen
Parts. To access the single Part use push buttons FF11 and FF66 for Parts 1, 2, 3 and 4 that
can be selected by pressing the same push buttons repeatedly. Use push buttons FF22
and FF77 for Parts 5, 6, 7, and 8. Use push buttons FF33 and FF88 for Parts 9, 10, 11 and 12 and
push buttons FF44 and FF99 for Parts 13, 14, 15 and 16.
Once the Part has been found, it's value can be modified using the D
DA ATTA A CCU UR RSSO OR R
push buttons which, if pressed together at the same time, will reset the value.
The parameters that can be modified in this way are distributed over seven pages
that are called up using push buttons PPA
AG GEE ++//--, and include Volume, Reverb, Effects,
Pan, Shift, Channel Rx, Channel Tx, )already explained in the previous section).
The FF55 M
Muuttee ((SSoolloo)) function is used to establish which track will be impacted by the FF1100 M Muuttee action. When FF55 is set on M Muuttee ((SSoolloo)), F10 is used to
mute only the track selected at the time from playback. Press F5 again and the relative function is changed into SSoolloo ((M Muuttee)) and FF1100 M Muuttee mutes
out all the tracks with the exception of that selected. Press EEXXIITT or FF55 EEssccaappee to return to the main page of Song . To save the modifications to the
song (so that when next this song is called up, it will be played back using these new parameter settings SSA
AV VEE should be used.
Song Play, Midi file and Karaoke