KETRON SD5, Руководство пользователя

Страница: 42 / 122

U sing a MIDI pedal for the bass
The SD5 enables the connection of a MIDI pedal to control the manual bass line and to set the chords. The MIDI reception channel is to be set
for the bass part on the same transmission channel as the pedal, by proceeding as follows:
● Connect the MIDI pedal to MIDI In 2 (Keyboard).
●
From the main page of the display press FF66 M MIID DII.
● Select FF22 C Chhaannnneell R Reecceeiivvee.
●
Find the Bass parameter using the D DA ATTA A C CU UR RSSO OR R ((U Upp aanndd D Doow wnn)) push buttons and modify the receiving MIDI channel using the D DA ATTA A C CU UR R--
SSO OR R ((LLeefftt aanndd R Riigghhtt)) push buttons based on that of the pedal.
●
Enable the M Maannuuaall B Baassss mode on the LLeefftt M Meennùù menu using the FF33 M Maannuuaall B Baassss function.
● Enable the use of the pedalboard to play the bass timbre associated with the Style in use, calling up the FF110 0 B Baass TToo PPbb function from the
A Arrrraannggee M Mooddee menu.
The pedal can also be used to add chords, however, when it is used alone it cannot play above the Major chords. To modify the tonality of the
chords use the optional pedal switches FS13 and FS6 or use a pedal with four switches for guitarists (Mod. 9AC101) that has a special method of
adding tonality variations. Proceed as follows to enable it:
●
From the main page of the display press FF44 A Arrrraannggee M Mooddee.
● Move onto page 23 using the PPA AG GEE ++ push button.
●
Press FF11 44SSw w. M Mooddee to set as O Onn.
The MIDI parameters modified can be saved in a MIDI Set-up whereas the status of 44SSw w. M Mooddee can be saved in a Registration.
USING A MIDI PEDAL FOR THE CHORDS
Proceed as follows to control the chords from the pedal:
● In the A AR RR RA AN NG GEE M MO OD DEE - Page 1 set F9 to Normal
●
If the SSttaarrtt button is lit, the major chord relating to the note pressed on the pedal-board will be heard. The minor and 7
th
chords can be obtai-
ned by using a special 3 switches pedal or the Footswitch with 6 or 13 switches.
●
If the SSttaarrtt button is not lit, the 2 Lower parts play in major tonality.
DYNAMICS
The bass dynamics can be controlled from the pedal using the Normal/Fixed function (F9 in the Arrange Mode menu). If set to Fixed, the dyna-
mics becomes fixed and its value can be modified from 0 to 127 by acting on "Value".
SD5
40
Using a MIDI pedal for the bass