KETRON SD5, Руководство пользователя

Страница: 39 / 122

SD5
37
of each single track that makes up the Style.
When the modification procedure has been terminated, the new modifications to the Style are saved overwriting the original Style.
For easier programming, you may set the A
Arrrraannggee V Viieew w pages while the Style is playing.
The tracks playing are indicated by a small blinking point. The single tracks of the automatic accompaniment, as well as LLoow weerr 11 and LLoow weerr 22,
are assigned to the relevant function push buttons. Select F4 Lower 1 or F5 Lower 2, to display the current part related to the Arranger and the
transposition of the part selected. Use the PPA
AG GEE ++//-- buttons to call up the next pages.
MODIFYING THE SOUNDS
From any of the four pages you may also modify the sound assigned to a track for the A Arrrraannggee A A,, B B,, C C,, D D,, IInnttrroo 11,, 22,, 33,, EEnnddiinngg 11,, 22,, 33 parts.
Modification can affect either the currently selected Arranger part (SSiinnggllee mode) or all parts (G Glloobbaall mode), except for the Drum Sets, whose
modifications affect all parts.
The sound can be selected while the Arranger is stopped for the A
Arrrraannggee A A,, B B,, C C and D D parts, whereas for the Intros and Endings you need to
start the Arranger, call up the IInnttrroo or the EEnnddiinngg and then, once you have started the part, select the sound you wish to modify.
Use the following procedure to change a sound:
●
Select the Style you wish to modify and then press EXIT to go back to the main page of the display.
● Gain access to Arrange View by pressing the F5 ARRANGE VIEW button or by pressing the selected Style twice.
●
To modify an Arranger part, select it using the dedicated function push buttons. The Arranger can either be playing or in stop statues.
For the Intros and the Endings, the selection can be carried out only with the Arranger playing. To see which one of the melodic accompaniment
tracks currently have data (melodic information), you may start the Arranger and observe which tracks have a small blinking point associated
with them.
●
To select the track whose timbre is to be modified, use the relevant function push buttons to the side of the display, the selected track beco-
mes highlighted for about two seconds.
●
Within these two seconds, you need to press one of the V VO OIIC CEESS push buttons to call up the voice family. From that moment on there will be
no time limits to find the voice you want to associate with the selected accompaniment track.
●
Select the voice using the V VO OIIC CEESS push buttons (and, if required, the PPA AG GEE ++//-- buttons) prior to the function push buttons to select the exact
voice.
● Once the voice has been selected, use the D DA ATTA A C CU UR RSSO OR R buttons to determine if the modification has to refer to all the Arranger parts (Global
mode) or only to the one currently in use (SSiinnggllee mode). The G
Glloobbaall/SSiinnggllee parameter can be shown on the bottom of the display or above
the box where the title of the Style in use is shown. Live Drums are excluded.
The sound choices made in G Glloobbaall or in SSiinnggllee mode applies also to the two LLoow weerr parts and the D Drruum m 11 track. In the latter case, after having
selected the D Drruum m 11 track, the V VO OIIC CEESS push buttons call up groups of preset Drum Sets and User Drum Sets. It is not possible to modify the Drum
Set of Drum 2 because this exploits a Live Drum and particular settings which would thwart the modification. The Style modified as described
above must be saved if you do not want to lose the settings. Further details will be given later on in this section.
LOWER TRANSPOSITION 1 & 2
Select the part pressing FF44 LLoow weerr 11 or FF55 LLoow weerr 22. On the display the present Arranger part and the transposition of the selected part is
displayed. Set the transposition with the TTR RA AN NSSPPO OSSEE ++//-- push buttons within a few seconds; otherwise the LLoow weerr transposition parameter disap-
pears and the TTR RA AN NSSPPO OSSEE ++//-- push buttons take over the function to transpose the entire Style and keyboard.
Repeat the operation for the other Style parts.
ARRANGE VIEW: FIRST PAGE
Further to modifying the volume for the single tracks and the LLoow
weerr parts, the SD5
allows you to activate the M Muuttee function on a single track.
This setting will remain stored also for the next Styles selected.
In order to activate the M
Muuttee function on a track, select the track pressing the rele-
vant function button and then press both D
DA ATTA A C CU UR RSSO OR R ((LLeefftt aanndd R Riigghhtt)) buttons
at the same time.
If you wish to restore the initial volume value, press one of the two D
DA ATTA A C CU UR RSSO OR R
push buttons.
In order to modify the volume of a track or of a part, select it with the relevant
function push button.
Modify the volume value using the D
DA ATTA A C CU UR RSSO OR R ((LLeefftt aanndd R Riigghhtt)) push buttons.
The M Muuttee function is activated only by pressing both DATA CURSOR (Left and Right)
push buttons at the same time, and not by setting the value to zero. For the LLoow weerr
parts only, you may establish a different volume value for the single Arranger parts.
Arranger