Opis ogólny
153 / 168
V 1.0
Prawidłowy kierunek obrotów pompy jest wtedy, gdy pompa obraca się w kierunku przeciwnym do ruchu
wskazówek zegara, gdyż silnik, patrząc od góry, dokonuje rozruchu w kierunku zgodnym z ruchem wskazówek
zegara.
Ostrzeżenie przed obracającym się wirnikiem!
Nie dotykać obracającego się wirnika i nie sięgać przez króciec tłoczny do komory pompy! Podczas eksploatacji
nigdy nie sięgać do komory pompy ani do obracających się części. Przed rozpoczęciem prac konserwacyjnych
lub naprawczych wyłączyć pompę i zaczekać, aż obracające się części zatrzymają się!
3.4.3 Uszczelnienie / obudowa uszczelniająca
Uszczelnienie wykonane jest w formie dwóch niezależnie od siebie działających uszczelnień pierścieniem
ślizgowym z węglika krzemowego w wykonaniu tandemowym. Obudowa uszczelniająca znajduje się między
silnikiem a obudową pompy. Składa się ona z osłony łożyska i pokrywy ciśnieniowej, które razem tworzą
przestrzeń uszczelniającą wypełnioną białym olejem o czystości medycznej. Śruba inspekcyjna na osłonie
łożyska umożliwia kontrolę.
3.4.4 Obudowa pompy
Obudowa pompy dostarczana jest zależnie od wersji i wariantu silnika z różnymi przyłączeniami. Umożliwia to
optymalne połączenie z zespołami orurowania firmy Kessel.
3.4.5 Wirnik
Wirnik przymocowany jest do wału silnika i jest przez niego napędzany.
Zależnie od rodzaju pompy i zastosowania wirniki mają różne formy:
• K: zamknięty wirnik jednokanałowy do zabrudzonych i zawierających osady czynników tłoczonych z małą
ilości stałych zanieczyszczeń (np. za separatorem).
• F: wirnik o swobodnym przepływie do zabrudzonych czynników tłocznych zawierających stałe i włókniste
zanieczyszczenia tworzące sploty (np. szara woda i woda deszczowa)