Kessel EasyClean free NS 10 Скачать руководство пользователя страница 34

Страница: 34 / 61

34 / 61

Installation

2019/11

010-917_SON_EN

3.4.3 Function check system type E

C D

• Switch the “Mix & Pump” control unit on.

Make sure that the switchover valve is not in the

“disposal” position, since otherwise the contents of the system tank

would be pumped off.

• Set the switchover valve <26> to the position cleaning and shredding

(handle to the right).

• Press the

Start / Stop

key, the pump(s) start(s) to run.

• Carry out a visual inspection through the viewing glass to ensure that

water is being pumped into the system tank through the pressure

pipe <22>.

• Press the

Start / Stop

key, the pump(s) is/are switched off.

Check the water supply function

• Open the cold water and hot water supplies

alternately and make sure that water is running into the system

tank via the refill inlet.

• Carry out initialisation and functional check on the

SonicControl

in accordance with the operating instructions

provided (optional).

System type E is now ready to use.

3.4.4 Function check system type F

C D E

Check the function pump(s) / cleaning and shredding

• Switch the “Auto Mix & Pump” control unit on.
• Press the key

Start / Stop

, the menu

Maintenance

appears.

•

Select

automatic operation

and press OK, the menu

Automatic

operation

appears.

• Press OK, automatic operation starts, after the delay has expired

(shown on the display) the pump(s) will start.

• Carry out a visual inspection through the viewing glass to ensure

that water is being pumped into the system tank through the

pressure pipe <22>.

•

Press the ESC key twice and confirm

Cancel emptying?

by pressing

OK, the pump(s) is/are switched off and ready for operation.

1) Hot water is recommended

Abb. [32]

Abb. [33]

Содержание EasyClean free NS 10






























































Результаты поиска

Содержание EasyClean free NS 10

Отзывы:

Похожие инструкции для EasyClean free NS 10

Бренды по названию

Популярные бренды

Kessel EasyClean free NS 10, Инструкции по установке, эксплуатации и техническому обслуживанию

Результаты поиска

Содержание EasyClean free NS 10

Отзывы:

Похожие инструкции для EasyClean free NS 10

Бренды по названию

Популярные бренды