Installation
31 / 61
2019/11
010-917_SON_EN
3.3.3.3 Initialising the control unit
Dry running of the pump(s) must be avoided at all costs. Do not press the
Start / Stop
key!
• Switch the power supply on and move the main switch to the ON position, the menu “3.8.1”, page 53
appears on the display.
If the display does not offer initialisation (menu 3.8.1), the control unit has already been initialised. In this case,
the parameters set (in accordance with the list below) must be checked via the operating menu (for operation
of the control unit and the operating menu see page 49).
During initialisation, the following input is expected:
– Language
– Date / Time
–
SonicControl
– Standard
– Nominal size
– Number and power of the pumps
Language
• Press OK.
• Use the cursor keys to select the language and apply by pressing OK, the menu
Date/Time
appears.
Date / Time
•
Set the respective flashing figure in date and time and apply by pressing OK. Following the last entry, if a
SonicControl
sensor is connected, the menu
SonicControl
appears,
if not, the menu
Standard
appears. The
date for emptying also appears and is automatically saved (to change see (see 6.3 System type F on page
49), menu “2.4”, page 51).
SonicControl
sensor
If there is a SonicControl (option) connected, answer the question with “yes”, otherwise continue with “no”, the
menu
Standard appears.
If “yes”:
• enter password (must be obtained from KESSEL).
• Select the system type from the selection displayed and apply by pressing OK, the menu
Standard
appears.
Standard
• Select Euro Standard 1825 and apply by pressing OK, the menu
Nominal size
appears.
Nominal size
•
Select the nominal size in accordance with the type plate specifications and apply by pressing OK, the menu
Number of pumps
appears.
Number of pumps
