KD GEMINI – INSTALLATION/OPERATION MANUAL
KD Gemini
May-06
2
1.0 INTRODUCTION
Please read and understand this manual before installing, operating or
maintaining the furnace.
The KD Gemini is engineered to provide rapid warm up,
giving you better room temperature control, dependable service and peace of mind.
This appliance features an insulated cabinet, which greatly reduces operating noise. To
ensure you have a clear understanding of the operating procedures of this appliance
please take the time to read Section 2, “HOMEOWNER INFORMATION”, of this
manual. If you have any questions, your KERR dealer will be happy to answer them for
you.
2.0 HOMEOWNER INFORMATION
2.1 AIR FILTERS
To maintain furnace performance and safety, replace dirty filters as required or at least
once every heating season. Use new approved disposable filters of the same size and
type, or clean permanent filters according to manufacturer’s instructions. Replace the
filters or clean the filters more often if dusty conditions exist. Dirty, clogged or wrongly
sized filters will impair the furnace performance and may cause the furnace to shut
down or overheat.
2.2 REGULAR MAINTENANCE
Have a qualified technician check complete furnace operation
at least once a year
.
2.3 WARNINGS
NEVER
BURN GARBAGE OR PAPER IN THE UNIT AND NEVER STORE
COMBUSTIBLE MATERIAL AROUND IT.
DO
NOT
ATTEMPT TO START BURNER WHEN EXCESS OIL HAS ACCUMULATED,
WHEN UNIT IS FULL OF VAPOUR, OR WHEN COMBUSTION CHAMBER IS VERY
HOT.
DO
NOT
USE GASOLINE, CRANKCASE DRAININGS OR ANY OIL CONTAINING
GASOLINE.
2.4 DIRECT VENT
It is the responsibility of the homeowner to ensure that the area around the Direct Vent
terminal and air intake is free of snow, ice, and debris. The vent terminal should be
checked during heavy snowstorms to ensure proper operation.