Kernau KDI 4853, Инструкция по эксплуатации

Страница: 59 / 90

EN
59
If shaking and hitting noises are heard during a wash operation
• Dishes placed incorrectly.
• Spray arm hitting the dishes..
If there are partial food wastes left on the dishes
• Dishes placed incorrectly into the machine, sprayed water did not reach related
places.
• Basket overly loaded.
• Dishes leaning against one another.
• Very small amount of detergent added.
• An unsuitable, ineffective wash programme selected.
• Spray arm clogged with food wastes.
• Filters clogged.
• Filters incorrectly fitted.
• Water drain pump clogged.
If there are whitish stains on the dishes
• A very small amount of detergent is being used.
• Rinse aid dosage setting at a very low level.
• No special salt is being used despite the high degree of water hardness.
• Water softener system setting is at a very low level.
• Salt compartment cap not closed well.
• A detergent without phospate used; try one that contains phosphate.
If the dishes won't dry up
• A programme without a dry operation selected.
• Rinse aid dosage set too low
• Dishes unloaded too fast.
If there are rust stains on the dishes
• Stainless-steel quality of the dishes washed is insufficient.
• High rate of salt in the wash water.
• Salt compartment cap not closed well.
• Too much salt spilt into the sides and into the machine while filling it with salt.
• Unhealthy mains grounding.• Nieprawidłowe uziemienie sieci elektrycznej.
Door is not opened / closed properly ;
• Not proper weight wooden part inserted on the door. ( Follow the weight given in
the Assembly manuel )
• The tensile of the door spring not adjusted properly. Adjust it according to the As-
sembly manuel.
Call an authorised service if the problem still persists after the controls or in
case of any malfunction not described above.