Kernau KDI 4853, Инструкция по эксплуатации

Страница: 44 / 90

EN
44
Testing strip
The washing effectiveness of your machine depends on the softness of the tap water.
For this reason, your machine is equipped with a system that reduces the hardness in
mains water supply. The washing effectiveness will increase when the system is cor-
rectly set. To find out the water hardness level of water in your area, contact your local
water board or determine water hardness level by using the test strip(if available).
If the hardness of the water you use is above 90 dF (French hardness) or if you are
using well water; you are recommended to use filter and water refinement devices.
NOTE: H
ardness level is adjusted to level 3 as a factory setting.
Adjusting salt consumption
Table of Water Hardness Level Settings
1.
Open the testing strip.
2. Run water through your tap for 1 min.
3. Keep the testing strip in water for 1 sec.
4. Shake the testing strip after taking it out of water.
5. Wait for 1 min.
6. Make your machine’s water hardness setting according to the result obtained thro-
ugh the testing strip.
1 2 3 4 5 6
Water
hardness
level
German
hardness
dH
French
hardness
dF
British
hardness
dE
Hardness Level
Indicator
1 0-5 0-9 0-6 L1 is seen on display.
2 6-11 10-20 7-14 L2 is seen on display.
3 12-17 21-30 15-21 L3 is seen on display.
4 18-22 31-40 22-28 L4 is seen on display.
5 23-34 41-60 29-42 L5 is seen on display.
6 35-50 61-90 43-63 L6 is seen on display.