Kernau KDI 4853, Инструкция по эксплуатации

Страница: 56 / 90

EN
56
MAINTENANCE AND CLEANING
Cleaning the machine in regular intervals prolongs the machine’s service life.
Check if any food wastes have remained on the coarse and fine filters. If any food wa-
stes are left, remove the filters and clean them thoroughly under the water tap.
a. Micro Filter b. Coarse Filter c. Metal/Plastic Filter
• Never use your dishwasher without any filter.
• Incorrect fitting of the filter will reduce the washing effectiveness.
• Clean filters are very important in terms of the proper running of
the machine
To remove and clean the filter combination, turn it counter cloc-
kwise and take it out by lifting upwards.1
Pull and remove the metal/plastic filter. 3 Then pull the coarse
filter out of the micro filter 2 Rinse it with lots of water under
the tap. Refit the metal/plastic filter. Insert the coarse filter into
the micro filter in a way that the marks will correspond to one
another. Attach micro filter into the metal/plastic filter and turn to
the direction of arrow and it is locked when the arrow on micro
filter can be seen from across. 4
Oil and lime may accumulate in the machine’s washing section.
In case of such accumulation;
Fill the detergent compartment without loading any dishes into the machine, select
a programme that runs at high temperature, and start the machine. In case of insuf-
ficiency, use special cleansing material available in the market. (Cleansing material
produced special to machines by detergent producers.)
•
Cleaning the seals in the machine door,
To clean any accumulated residues in the door seals, wipe the seals regularly by
using a dampened cloth.
•
Cleaning the machine,
Clean the filters and spray arms at least once a month.
Unplug your machine and turn off its tap before starting the cleaning.
Do not use hard materials when cleaning your machine. Wipe with a fine cleaning
material and a dampened cloth.
•
Filters