Kernau KBO 0965 SK B, Руководство пользователя

Страница: 40 / 64

EN
40
ACCESSORIES
The product is supplied with accessories. You can also use accessories you purchase from other sources, but
they must be heat and flame resistant. You can also use glass dishes, cake moulds and oven trays that are
appropriate for use in an oven. Follow the manufacturer’s instructions when using other accessories. In the
event small size dishes are used, place the dish onto the wire grid, as it will completely be on the middle part
of the grid. If the food to be cooked does not cover the oven tray completely, if the food is taken from the deep
freezer or the tray is being used for collecting the food’s juices that flow during grilling, form changes can
be observed in the tray. This is due to the high temperatures that occur during cooking. The tray will return
to its old form when the tray cools down after cooking. This is a normal physical event that occurs during
heat transfer. Do not place hot glass trays and dishes into a cold environment straight from the oven to avoid
breaking the tray or dish. Do not put onto cold and wet surfaces. Place on a dry kitchen cloth and allow to
cool slowly. When using the grill in your oven; we recommend you use the grid that was supplied with the
product (where appropriate). When using the wire grid; put a tray onto one of the lower shelves to allow the
oil to be collected. Water may be added to the tray to assist in cleaning. As explained in the corresponding
clauses, never attempt to use the gas operated grill burner without the grill protection lid. If your oven has a
gas operated grill burner, but the grill heat shield is missing, or if it is da maged and cannot be used, request a
spare part from the nearest Authorized Service Centre.
WIRE GRID
The wire grid is used to grill or place different cookwares on it.
WARNING:
Fit the grid correctly into any corresponding rack in the oven cavity and push
it to the back.
DEEP TRAY
The deep tray is used to cook stews.To locate the tray correctly in the cavity,
put it to any rack and push it to the back.
REMOVAL OF WIRE SHELF
Pull the wire shelf as shown in the picture. After releasing it from clips, lift it up.
* The accessories for your oven may be different due to the model of your product.
a