KERN OZG 497, Инструкция пользователя

Страница: 17 / 21

OZG_497-BA-e-1510 16
5.8 Fitting and adjusting a camera
You can connect special microscope cameras to the devices in the OZG 497 series,
so that you can digitally record images or sequences of objects being observed.
The connection for this is on the top side of the microscope head .
To fit a microscope camera properly, you must use an adapter with a C-mount
thread.
There is already an adapter fixed to the camera adapter connection (white
varnishing), which is not suitable for C-Mount cameras. You firstly have to
remove this adapter in order to attach an appropriate one.
In total there are three focusable adapters to choose from
(see figure below) . The
difference between these adapters is that they have different integrated magnification
(0.3x, 0.5x, 1.0x).
The camera and adapter are then united using the C-mount thread.
C-mount adapter
The image which is shown on the camera connected to the device can often have a
different level of focus compared with the image on the eyepiece. In order to be able
to bring both images into focus,
the focus can be adjusted by those adapters
when turning the attached black plastic ring.