13
OZG_497-BA-e-1510
5.5 Adjusting the stand
Torque of the focus wheels
You adjust the torque of the focus wheels by holding one of the two wheels in place
and using the other hand to turn the other wheel.
Depending on the direction of the turn, the torque will be increased or decreased.
On one hand, this function can help to make it easier to adjust the focus and on the
other hand it can prevent the microscope head from slipping down unintentionally. In
this way you can avoid possible damage which could occur if the objective lens and
the object being observed should collide.
Tilt function
The stand of the microscope has a tilt function. This is enabled by a hinge built-in on
the stand underneath the working stage (
Tilt direction see figure below
). For special
applications the tilt function can be helpful in terms of handling and ergonomics.
For tilting the microscope you have to push or pull strongly along the tilt direction on
the column of the stand (
see figure below
).
Due to the sluggishness of the hinge an additional fixation is not needed.
Tilt function OZG 497
Содержание OZG 497
Страница 2: ......
Страница 7: ...OZG_497 BA e 1510 6 2 Nomenclature...
Страница 8: ...7 OZG_497 BA e 1510 Rear view...