CB/FCB-BA-e-0640
25
8.5 Interface
RS232C
Data output via interface RS 232 C
General Information
The previous condition for the data transfer between balance and a peripheral device
(e.g. printer, PC ...) is that the appliances are set to the same interface parameters
(e.g. baud rate, transfer mode ...).
8.5.1 Data transfer mode
Setting of data transfer mode
Balance display
1. Keep the
key pressed until „
Unit
" is displayed.
Unit
2. Press
key, „
Pr
“ appears.
Pr
3. To change the setting, press the
key.
Pr PC
4. The mode can be converted using the
key
(Pr PC; AU PC; AU Pr ;
re Cr
; BA Pr ;details chapter 9.4).
AU Pr
5. The changed setting is taken over by pressing
the
key.
6. The balance returns to the weighing mode.
0.0 g
8.5.2 Baud
rate
The baud rate necessary for the measuring values transfer can be set.
In the following example the baud rate is set to 9600 baud.
Setting of baud rate
Balance display
1. Keep the
key pressed until „
Unit
" is displayed.
Unit
2.
Press
key
Pr
3. Press
key, „
baud
“ appears.
Baud
4. Confirm by pressing the
key
4800
5. The baud rate can be changed using the
key (1200,
2400, 4800,
9600,
19200).
9600
6. The changed setting is taken over by pressing
the
key.
7. The balance returns to the weighing mode.
0.0 g
