AES/AEJ-BA-e-0912
59
5. Place sample for the lower (i.e. smaller) limiting
value on the weighing plate:
6. Save by pressing the
F
-key. The lower limit will
briefly be faded in, followed by [
H. SET
] (This
completes the entry provided only one limit is set
for tolerance control – menu setting
[
23. P
1
.1
]
)
H. SET
1
7. Wait until the display starts flashing and the most
recently upper limit is displayed. Place sample for
the upper (i.e. larger) limiting value on the weigh-
ing plate.
0.0000
g
M
8. Save by pressing the
F
-key.
The upper limit will be faded in and the weighing bal-
ance returns to tolerance weighing mode.
Remove sample. From here evaluation takes place
whether the goods to be weighed are within the two
tolerance limits.
0.0000
g
Display change
Pressing the
F
-key repeatedly is a way to change the display value to additional en-
abled functions.
