23.1 VPN Server Configuration
313
It is recommended to check whether IP collision is not reported after each change in
configuration of the local network or/and of the VPN!
Warning
1.
Under certain circumstances, collision with the local network might also arise when
a VPN subnet is set automatically (if configuration of the local network is changed
later).
2.
Regarding two VPN tunnels, it is also examined when establishing a connection
whether the VPN subnet does not collide with IP ranges at the other end of the tunnel
(remote endpoint).
If a collision with an IP range is reported upon startup of the VPN server (upon click-
ing
Apply
in the
Interfaces
tab), the VPN subnet must be set by hand. Select a network
which is not used by any of the local networks participating in the connection. VPN
subnets at each end of the tunnel must not be identical (two free subnets must be
selected).
3.
VPN clients can also be assigned IP addresses according to login usernames. For
details, see chapter
SSL certificate
Information about the current VPN server certificate. This certificate is used for ver-
ification of the server’s identity during creation of a VPN tunnel (for details, refer to
chapter
). The VPN server in
WinRoute
uses the standard SSL certificate.
When defining a VPN tunnel, it is necessary to send the local endpoint’s certificate fin-
gerprint to the remote endpoint and vice versa (mutual verification of identity — see
chapter
).
Hint
Certificate fingerprint can be saved to the clipboard and pasted to a text file, email mes-
sage, etc.
Click
Change SSL Certificate
to set parameters for the certificate of the VPN server. For
the VPN server, you can either create a custom (self-subscribed) certificate or import a cer-
tificate created by a certification authority. The certificate created is saved in the
sslcert
subdirectory of the
WinRoute
installation directory as
vpn.crt
and the particular private
key is saved at the same location as
vpn.key
.
Methods used for creation and import of SSL certificates are described thoroughly in
chapter
.
Note:
If you already have a certificate created by a certification authority especially for
your server (e.g. for secured Web interface), it is also possible to use it for the VPN server
— it is not necessary to apply for a new certificate.
Содержание Firewall6
Страница 1: ...Kerio WinRoute Firewall 6 Administrator s Guide Kerio Technologies...
Страница 129: ...8 5 HTTP cache 129...
Страница 404: ...404...