Kerio Tech Firewall6, Руководство администратора

Страница: 131 / 404

9.2 Bandwidth Limiter configuration
131
Figure 9.1 Bandwidth Limiter configuration
The Bandwidth Limiter module enables to define reduction of speed of incoming traffic (i.e.
from the Internet to the local network) and of outgoing data (i.e. from the local network to the
Internet) for transmissions of big data volumes and for users with their quota exceeded. These
limits do not depend on each other. This means it is possible to use one of these functions,
both or none.
Warning
In the Bandwidth Limiter module, speed is measured in kilobytes per second ( KB/s ). while ISPs
usually use kilobits per second ( kbps , kbit/s or kb/s ), or in megabits per second ( Mbps , Mbit/s
or Mb/s ). The conversion pattern is 1 KB/s = 8 kbit/s .
A 256 kbit/s line’s speed is 32 KB/s , a 1 Mbit/s line’s speed is 128 KB/s .
Setting limit values
The top of the dialog box contains a section where limits for transfers of big data volumes
can be set. These values determine bandwidth that will be reserved for these transfers. The
remaining bandwidth is available for other traffic.
Tests have discovered that the optimal usage of the Internet line capacity is reached if the
value is set to approximately 90 per cent of the bandwidth. It the values are higher, the
bandwidth limiter is not effective (not enough speed is reserved for other connections and