Kerio Tech Firewall6, Руководство администратора

Страница: 374 / 404

Chapter 25 Specific settings and troubleshooting
374
8. Use a plaintext editor (e.g. Notepad ) to open the
winroute.cfg
configuration file. Go to
the following section:
<list name="Interfaces">
Scan this section for the original adapter. Find an identifier for a new interface in the new
adapter’s log and copy it to the original adapter. Remove the new interface’s log.
Example
Name of the local network interface is LAN . This network connection is labeled as Local
Area Connection in the new operating system. Now, the following data can be found in
the Interfaces section (only the essential parts are listed):
<listitem>
<variable name="Id">
\DEVICE\{7AC918EE-3B85-5A0E-8819-CBA57D4E11C7}
</variable>
<variable name="Name">LAN</variable>
...
</listitem>
<listitem>
<variable name="Id">
\DEVICE\{6BF377FB-3B85-4180-95E1-EAD57D5A60A1}
</variable>
<variable name="Name">Local Area Connection</variable>
...
</listitem>
Copy the
Local Area Connection
interface’s identifier into the
LAN
interface. Remove
the data for
Local Area Connection
(a relevant
listitem
section).
When all these changes are performed, the data in the configuration file relating to inter-
face connected to the local network will be as follows:
<listitem>
<variable name="Id">
\DEVICE\{6BF377FB-3B85-4180-95E1-EAD57D5A60A1}
</variable>
<variable name="Name">LAN</variable>
...
</listitem>
9. Save the
winroute.cfg
file and run WinRoute Firewall Engine .
Now, the WinRoute configuration is identical with the original WinRoute configuration on the
prior operating system.